Made in the U.S.A.
Made in the U.S.A.
|
 |
 |
 |
 |
 |
"The Powerful Difference"
Fuse Block Assemblies |
|||
 |
The Fuse Block Assembly (ME-125F, ME-200F, ME-300F and ME-400F) helps protects the battery bank and cables from damage caused by short circuits and overloads. Includes a Slow-Blow high current fuse with mounting block and cover. |
||
ME-DCLD |
|||
 |
The ME-DCLD (DC Load Disconnect) Pigtail Adapter allow users to remove a 12 volt DC signal to disable the inverter function. Used with ME, MS and RD Series inverter/chargers.
|
||
| Click for more information | |||
ME-ISW |
|||
 |
The ME-ISW (Ignition Switch Lockout) pigtail adapter is designed to automatically disable the inverter function when a 12 volt DC signal is supplied.
|
||
| Click for more information | |||
ME-MW-E  |
|||
.jpg){kind=small} |
The ME-MW-E (MagWeb-Ethernet) is used to remotely monitor Magnum inverters and accessories via an ethernet connection thru the internet.
|
||
| Click for more information | |||
ME-MW-W |
|||
.jpg){kind=small} |
The ME-MW-W (MagWeb-Wireless) is used to remotely monitor Magnum inverters and accessories via a wireless connection thru the internet.
|
||
| Click for more information | |||
ME-PT1 |
|||
 |
The ME-PT1 (Pigtail Adapter One-wire) is designed to be connected to the AGS to allow the connected generator to be automatically started when a 12 volt DC signal is supplied.
|
||
| Click for more information | |||
ME-PT2 |
|||
 |
The ME-PT2 (Pigtail Adapter Two-wire) is designed to be connected to the AGS to allow the connected generator to be automatically started when the two wires are connected. |
||
| Click for more information | |||
ME-RC-BZ |
|||
.jpg){kind=small} |
The ME-RC-BZ is a plastic molded bezel that allows the ME-RC remote to be surface/wall mounted. Note: This is the same bezel included with the ME-ARC advance remote. |
||
| Click for more information | |||
ME-RSA and ME-RSA-M |
|||
 |
The ME-RSA and ME-RSA-M Remote Switch Adapters allow users to connect a external switch and remotely turn the inverter ON and OFF.
|
||
| Click for more information | |||
ME-SSI |
|||
 |
The ME-SSI is a Series Stacking Cable Kit which allows two MS4024 inverters to be stacked together to achieve 120/240 VAC output. Series stacking is commonly used for well pumps, tools, motors, and other 240 VAC appliances.
|
||
MM-DCLD |
|||
 |
The MM-DCLD (DC Load Disconnect) Pigtail Adapter allow users to remove a 12 volt DC signal to disable the inverter function. Used with MM Series, MM-AE Series and MMS Series inverter/chargers.
|
||
| Click for more information | |||
MM-ISA |
|||
 |
The MM-ISA (Ignition Switch Activate) Pigtail Adapter is designed to automatically
turn the inverter on when a 12 volt DC signal is supplied. Used with MM Series, MM-AE Series and MMS Series inverter/chargers.
|
||
| Click for more information | |||
MS-GFCI |
|||
 |
The MS-GFCI accessory allows a GFCI (Ground Fault Circuit Interrupter) receptacle to be installed directly on a MS2000-20B or MS2012-20B Magnum inverter.
|
||
| Click for more information | |||
| Product Categories: |
| Inverter/Chargers (Pure Sinewave) | Inverter/Chargers (Modified Sinewave) Inverter/Chargers (Export Versions) | Inverter (No charger) | Interconnection Systems Equipment Remote Controls | Auto Generator Start | Battery Monitor / Combiner | Other Accessories |
|
|
||||||||
